How to Print a Chikn-Style Long-Eared Puppy with Gen3dly: Full Tutorial
The long-eared yellow puppy with chaotic-good energy — wide eyes, floppy ears, surrounded by fast-food-named animal friends. Chikn Nuggit (BuzzFeed Animation Lab, 9M+ TikTok followers) turned 15-second surreal comedy into a billion views, and printer owners want that sweet-chaos energy on their desks.
This tutorial takes you from zero to a printed figure: generate an original long-eared puppy toy in the same cute-surreal language with Gen3dly, export it, and print it on any FDM printer. Same rule as our capybara, Nailong, and Loopy walkthroughs: an original character, not a copy of anyone’s IP. Personal use, zero legal risk.
What makes Chikn-style pups printable (and tricky)
The design language: a small yellow dog body, oversized head, very long floppy ears, big sparkling eyes. For printers:
- sitting pose with a curled tail — stable base, support-free,
- all-yellow single color — one PLA spool, no AMS,
- round compact body — forgiving for beginners,
- the ears are the challenge — long and thin, the classic thin-wall failure point.
Ears decide everything in this build. Everything below optimizes for ears that survive. The community already makes Chikn fan-art figures (Sketchfab, Thingiverse, Cults3D all host versions), but downloads give you someone else’s take — generating gives you yours.
A quick copyright note
Chikn Nuggit is a BuzzFeed Animation Lab / Frederator series with an active merchandise line. So: printing community fan-art files for yourself is the community norm; selling copies or files of the protected character is infringement. Our path: generate an original long-eared yellow puppy in the same sweet-surreal language — same desk energy, your own design. Desk = yes, shop = ask a lawyer.
Step 1 — Pick your design (2 minutes)
| Part | Options |
|---|---|
| Species vibe | Long-eared puppy, basset-beagle mix, floppy bunny-dog |
| Signature item | Tiny burger hat, star wand, mini blanket, donut floatie |
| Mood | Wide-eyed wonder, chaotic grin, sleepy loaf |
| Size | 80–100 mm desk toy (recommended), 50 mm keychain, 150 mm gift |
Walkthrough build: a chubby yellow long-eared puppy sitting, burger hat, 100 mm tall. The burger hat nods to the fast-food-named universe — and prints attached to the head, no assembly.
Step 2 — Generate with text-to-3D (5 minutes)
Prompt formula: subject + color + pose + finish + use. Copy-paste starter:
a chubby yellow long-eared puppy sitting, oversized head, big sparkling eyes,
wearing a tiny burger hat, smooth matte vinyl toy look, cute surreal collectible style,
3d printable figurine
Three variations (20 credits flat per generation):
- Classic sweet: add
pastel yellow tones, minimalist smooth sculpt, gentle happy expression— cleanest print, safest ears (keep them short here). - Chaos mode: add
one ear flopped over face, mischievous grin, dynamic playful pose— maximum character; print at 120 mm so the thin ear survives. - Keychain version: add
compact rounded proportions, short ears, loop hole on head— short ears print bulletproof at 50 mm.
The ear rule: long thin ears below ~1.2 mm snap. Prefer short rounded ears or thick floppy ears in the prompt, or scale to 120 mm. Pick the preview with the thickest ear bases — silhouette first, details later.
Prefer photo input? A front photo of any floppy-eared plushie (plain background, eye-level) works with image-to-3D — see our image-to-3D guide. Change the hat or expression so the result is your design.
Step 3 — Export the STL (1 minute)
Rotate fully: front, sides, back, underside. Ears should read as solid shapes from every angle. Export STL.
Step 4 — Repair and scale (10 minutes)
Standard checklist — full version in our printable guide:
- Repair: Fix Model in Bambu Studio / OrcaSlicer, or PrusaSlicer’s auto-repair. Round puppies usually pass first try.
- Scale: height to 100 mm (120 mm for the chaos version). Ear thickness: keep at ~1.2 mm minimum — measure in the slicer, scale up rather than hoping.
- Flat base: sit flat; shave 1–2 mm if rocking. Curled tail contact adds stability.
- Layer preview: scrub through — no floating hat, no vanishing ear tips.
Step 5 — Print it (2–4 hours, unattended)
| Setting | Value | Why |
|---|---|---|
| Layer height | 0.2 mm (0.12–0.16 mm for gifts) | Round shapes print clean at 0.2 |
| Walls | 4 for ear safety (3 elsewhere is fine) | Ears are the failure point |
| Infill | 10–15% gyroid | Plenty for a desk toy |
| Supports | None for sitting poses | Re-orient before adding plastic |
| Material | Yellow matte PLA (silk for photos) | One spool, zero purging |
A 100 mm puppy at 0.2 mm runs about 3 hours — an ideal evening print.
Step 6 — Finish it (optional, 15 minutes)
- Trim brim with a craft knife; light sanding on the base only.
- Acrylic markers: huge white eyes with big black pupils + tiny open smile = the whole sweet-surreal face.
- Burger hat in red/brown? Pause at hat height and swap filament — one manual swap, two-tone hat.
- Matte clear coat for daily handling.
Troubleshooting: the 4 failures
- Ear tips missing in preview → too thin. Regenerate with
thick floppy earsor scale up 20%. - Ear snapped after printing → wall count or thickness. Reprint at 4 walls, or the short-ear version at 120 mm.
- Slicer errors on import → Fix Model again, then voxel remesh backup. Round shapes remesh cleanly.
- Face looks generic → expression is everything. Regenerate adding
wide sparkling eyes, innocent chaotic grin— words steer the face more than you’d expect.
FAQ
Can I print Chikn Nuggit exactly? The character is protected IP (BuzzFeed Animation Lab). Download community fan-art for personal use per its licence, or generate an original long-eared puppy in the same style — same appeal, no risk.
What prompt makes a Chikn-style puppy? Subject + color + pose + finish + use: “a chubby yellow long-eared puppy sitting, oversized head, big sparkling eyes, wearing a tiny burger hat, smooth matte vinyl toy look, 3d printable figurine”.
How do I keep the long ears from breaking? Prompt for thick/short ears, print at 4 walls, keep thickness ~1.2 mm+, and scale up rather than down. Ears are the #1 failure — design around them.
Which printer works? Any FDM: Bambu A1/P1S, Prusa, Creality, Elegoo FDM. Buying advice in our printer review.
How much does it cost? One Gen3dly generation = 20 credits flat; 20 welcome credits cover it free. A 100 mm figure is dozens of grams of yellow PLA. See the pricing page.
Can I sell prints of my generated puppy? Only if the design is original and the export-time licence allows it — never of protected characters. Check the licence before selling.
Your turn: tonight’s print
Open Gen3dly, paste the starter prompt, pick the preview with the thickest ears, export STL, run the 4-step check, start before dinner. By bedtime a long-eared puppy guards your desk — designed by you.
Share Article
